15 x 30mm round stamping blank jig
dannylee
·
39
627
Design Files (1)
  • 15x 30mm Round Stamping blank Jig.xcs
    S1
    • Description
    I made this I was fed up with trying to home one at a time 30mm blank at a time the hole is 30.5mm with a 20mm finger hole for poking them out and keeping the blanks cool.
Made with 3mm x 2 basswood ply scrap, big enough to be pinned and held tight on the honeycomb
3x Canvas one for back, one for front and the 3rd are both combine so they can be cut straight from and 3mm A4 Basswood ply or MDF that's required, small amount of wood glue needed, I also use G-Clamps to add a little pressure to help the wood stick.
    Production Info
    Instruction
    Not included
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool S1
    20W
    Material used
    3mm Basswood Plywood
    A4 sheet of 3mm basswood ply
    Total time
    4 min
    Also compatible with other machines. Visit the Material EasySet Library  for more.
    Setting
    License
    CC0
    (aka CC Zero) is a public dedication tool, which allows creators to give up their copyright and put their works into the worldwide public domain.
    Do you like this project?