Thanksgiving Trivets
Jo Stapleton
·
12
140
Design Files (1)
  • Untitled.xcs
    P2
    • Description
    3 layered, inlay trivets. Made with basswood and walnut and felt from xTool.
Made a square in XCS and inserted the Turkey image with the outline and placed it in the middle. Then added the lines. Added an outline square around it. Set the engrave settings for the Turkey and then the settings for the cut. I made 2 bottoms for the backing with basswood. Did the basswood cut first and then the walnut cut. Once cut, i glued the frame on the bottom piece and Put some glue down and inserted a row if the basswood first, then a row of the walnut, till it was filled. I did the same with the walnut piece. I cut out 2 pieces of felt, to put on the back of the bottom to protect the surface.
    Production Info
    Instruction
    Not included
    Application scenario
    Laser processing
    Software
    xTool Creative Space
    Machine & processing module
    xTool P2
    55W
    Material used
    3mm Walnut Plywood
    3mm Basswood Plywood
    Felt
    xTool 3 mm basswood, 3mm walnut and felt
    Difficulty Level
    Intermediate
    Total time
    60 min
    Also compatible with other machines. Visit the Material EasySet Library  for more.
    Setting
    License
    Standard License
    You may access, download, use, reproduce, print this work for personal and noncommercial use only. You have no right to adapt, modify, edit, or create derivative works of this work in any format or manner. You shall not share, sub-license, sell, rent, transfer, distribute, redistribute, promote, market, advertise this work, its derivative work, any object printed with the work or its derivative work, or publish, republish, post, upload, host such work, derivative work or object on other digital platforms, web stores or cloud repositories, for commercial purposes and/or gaining profits.
    Do you like this project?